Power Bank User Manual
Product Components introduction
Charging Power Bank using computer slot
1) To Charge the Power bank, use the micro connector
supplied and plug into the INPUT port on one side then plug into the computer
USB slot on the other side. The LED light will turn to blinkingblue color during charging and the Blue LED
light will be static when the power bank is fully charged.
2) Press the on/off button once
will display the battery level on the power bank. One blue LED indicates
battery left about 25%, two blue LED 50%….LED battery indicator will be auto
off in 20 sec if no activity.
3) Double press the on/off button to turn
on/off the LED torchlight.
4) Long press the on/off button to turn on/off
the emergency blinking LED torchlight.
Charging Mobile phone using Power Bank
Charging phone using power bank
1) Plug USB cable to Power Bank output port and connect other
side with adaptable connector to the mobile phone. Press the on/off
button once on the power bank to turn on the power to charge the
mobile phone. The Blue LED light will turn on during the charging
time. Please pay attention to your mobile phone on the battery level
during the charging time.
Troubleshoot
The Power Bank could not be recharged using the usb
computer slot.
1) The connection of the cable might be loose, try to reseat charge cord and make sure the connection is firm and steady.
2) Faulty power bank – please contact us for repair/refund/exchange during the warranty period.
1) The connection of the cable might be loose, try to reseat charge cord and make sure the connection is firm and steady.
2) Faulty power bank – please contact us for repair/refund/exchange during the warranty period.
The Power Bank fails to charge the mobile phone or other
electronic devices
1) The power level of the power bank is too low, recharge the power bank.
2) The electronic devices might have incompatible voltage with the power bank output voltage. Please check the output of the digital devices.
3) Connection of the cable and connector might be loose, try reseat charge cord and make sure the connection is firm and steady.
1) The power level of the power bank is too low, recharge the power bank.
2) The electronic devices might have incompatible voltage with the power bank output voltage. Please check the output of the digital devices.
3) Connection of the cable and connector might be loose, try reseat charge cord and make sure the connection is firm and steady.
No comments:
Post a Comment